Filter
Top Products
Network Scanning
92
4
Go to Step f if you have set up only one E-mail server.
f Press a or b to choose Change Setting. Press OK. If you don’t have to change the quality, press a
or b to choose Enter Address. Press OK and then go to Step j.
g Press a or b to choose Color 150 dpi, Color 300 dpi, Color 600 dpi, B&W 200 dpi or
B&W 200x100 dpi. Press OK.
If you choose Color 150 dpi, Color 300 dpi, Color 600 dpi, go to Step h.
If you choose B&W 200 dpi or B&W 200x100 dpi, go to Step i.
h Press a or b to choose PDF or JPEG. Press OK and go to Step j.
i Press a or b to choose PDF or TIFF. Press OK and go to Step j.
j The LCD prompts you to enter an address. Enter the destination E-mail address from the dial pad or use
the One-Touch key or Speed Dial number. Press Mono Start or Color Start. The machine starts the
scanning process.
Using One-Touch or Speed-Dial number 4
You can also scan a document directly to an address you registered in a One-Touch or Speed-Dial number.
When you scan the document, the settings you registered with the One-Touch or Speed-Dial will be used for
the quality and the file type. Only One-Touch or Speed Dials with an E-mail address registered can be used
when you scan data using One-Touch or Speed-Dial. (I-fax address are not available for use.)
a Put the document face up in the ADF, or face down on the scanner glass.
b Press (Scan).
c Choose One-Touch or Speed-Dial number.
d Press Mono Start or Color Start.
The machine starts the scanning process.
Note
• Scan type depends on the settings, Mono Start or Color Start do not change the settings.
• You can store the scan resolution (Scan Profile) for each E-mail address if you store the E-mail address
in a One-Touch or Speed-Dial number. (See Dialling and storing numbers in Chapter 8 of the User’s
Guide.)
Scan to Image 4
When you choose Scan to Image, your document will be scanned and sent directly to the PC you designated
on your network. ControlCenter3 will activate the default graphics application on the designated PC. You can
change the Scan configuration. (See Image (example: Microsoft
®
Paint) on page 68.)
a Put the document face up in the ADF, or face down on the scanner glass.
b Press (Scan).