Filter
Top Products
Printing
3
1
Printing a document 1
When the machine receives data from your computer, it begins printing by picking up paper from the paper
tray. The paper tray can feed many types of paper and envelopes. (See the User’s Guide for information
about the Paper Tray and Recommended paper.)
a From your application, choose the Print command.
If any other printer drivers are installed on your computer, choose Brother MFC-XXXX or DCP-XXXX
Printer* as your printer driver from the Print or Print Settings menu in your software application, and then
click OK to begin printing.
*(Where XXXX is your model name. If you are using a LAN cable to connect your machine then LAN will
be in the printer driver name.)
Note
For Macintosh
®
users, see Features in the printer driver (For Macintosh
®
) on page 135.
b Your computer sends the data to the machine. The Data LED blinks in yellow and the machine starts to
print.
c When the machine finishes printing all the data, the LCD shows the machine status.
Note
You can choose the paper size and orientation in your application software.
If your application software does not support your custom paper size, choose the next larger paper size.
Then adjust the print area by changing the right and left margins in your application software.