Filter
Top Products
Sending a Fax
41
5
Setting your changes as a
new default 5
You can save the fax settings for
Fax Resolution, Contrast,
Glass ScanSize, Preview and
Real Time TX you use most often by
setting them as default. These settings will
stay until you change them again.
a Press (Fax).
b Press d or c to choose the menu option
that you want to change. Press your new
option.
Repeat this step for each setting you
want to change.
c After changing the last setting, press
d or c to display Set New Default.
d Press Set New Default.
e Press Yes.
f Press Stop/Exit.
Restoring all settings to the
factory settings 5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Press (Fax).
b Press d or c to display
Factory Reset.
c Press Factory Reset.
d Press Yes.
e Press Stop/Exit.
Sending a fax manually 5
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a Press (Fax).
b Load your document.
c To listen for a dial tone do one of the
following:
(MFC-790CW) Press
Speaker Phone on the machine or
pick up the handset.
(MFC-990CW) Press
Speaker Phone on the machine or
press (Talk) on the
cordless handset.
d Dial the fax number using the dial pad.
e When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass
press Send to send the fax.
f If you pick up the handset, replace it.
Sending a fax at the end of a
conversation 5
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b Load your document.
c Press Mono Start or Colour Start.
If you are using the scanner glass,
press Send to send the fax.
d Replace the handset.