Filter
Top Products
Chapter 7
66
Changing the remote codes 7
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 51. The preset
Remote Deactivation Code is #51. If you
want to, you can replace them with your own
codes.
a Press MENU.
b Press a or b to display Fax.
c Press Fax.
d Press a or b to display
Setup Receive.
e Press Setup Receive.
f Press a or b to display Remote Codes.
g Press Remote Codes.
h Press On (or Off).
i Do one of the following.
If you want to change the Remote
Activation Code, enter the new code.
Press OK, go to step k.
If you do not want to change the
Remote Activation Code, press OK,
go to step j.
j Do one of the following.
If you want to change the Remote
Deactivation Code, enter the new
code.
Press OK, go to step k.
If you do not want to change the
Remote Deactivation Code, press
OK, go to step k.
k Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
3-digit code using the numbers 0-9, l, #.
• Remote Codes might not work with some
telephone systems.