Filter
Top Products
Telephone and External devices
65
7
Inadvisable connection of extension
sockets (Fig. 1.)
7
1 Extension socket
2 Master socket
3 Incoming line
Recommended connection of extension
sockets (Fig. 2.)
7
1 Extension socket
2 Master socket
3 Incoming line
The fax machine must be plugged into the
master socket.
Note
These telephones are now connected as
external devices (see Connecting an
external or extension telephone
on page 63), because they are connected
to the fax machine via the T-connector.
Using a cordless external
telephone
(MFC-790CW only) 7
If your cordless telephone is connected to the
telephone line cord (See External and
extension telephones on page 63) and you
typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Speaker Phone to send the call to the
cordless handset.
Using remote codes 7
Remote Activation code 7
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the Remote Activation
Code l 5 1. Wait for the chirping sounds then
replace the handset. (See Fax Detect
on page 47.) Your caller will have to press
Start to send the fax.
Remote Deactivation code 7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double) Ring after the initial ring delay. If you
pick up the call on an extension telephone
you can turn the F/T Ring off by pressing
#51 (make sure you press this between the
rings).
FAX
11
2
3
FAX
11
2
3