Brother HL-4200CN Printer User Manual


 
1 - 5 PRINTER SYSTEM SETTINGS
Wait to restart the printer until after you set the gateway address at the last step. Continue to the next
step without restarting the printer.
Setting the IP Address
The IP address consists of four separate values (base 10) separated by decimal points. Each of the
four values can be set to a number between 0 and 255.
Continued from the previous page.
Setup IP Address
Panel *
When the new value is set, an * appears next to it.
9
Press the Job Cancel/Back or button once.
The lower line of the screen returns to Setup IP Address.
Continued from the previous step
TCP/IP
Setup IP Address
10
Press the button once.
TCP/IP
IP Address
11
Press the Form Feed/Set or button once.
IP Address
000.000.000.000*
12
Press the or button until the value you want appears (for
example, 192). You can hold down the buttons to change the value
in increments of 10.
IP Address
192.000.000.000
13
Press the button once to move the cursor to the next value.
IP Address
192.000.000.000
14
Repeat steps 12 and 13 to finish setting the IP address.
IP Address
192.168.001.100
15
Press the Form Feed/Set button once.
Continued
E
xamp
l
e:
IP Address 192.168.1.100