Filter
Top Products
Using your machine with a Macintosh
®
7 - 26
7
DEVICE SETTINGS (not available for DCP-7020)
You can configure the machine settings.
■
Remote Setup
— enables you to open the Remote Setup Program. (See MFC Remote Setup (Mac OS
®
X 10.2.4 or greater) (not available for DCP-7020) on page 7-36.)
■
Quick-Dial
— enables you to open the Set Quick-Dial window of the Remote Setup. (See MFC Remote
Setup (Mac OS
®
X 10.2.4 or greater) (not available for DCP-7020) on page 7-36.)
Note
When the machine is connected to a network, you cannot use these functions.
SCAN
This section contains four buttons for
Scan to Image
,
Scan
to OCR
,
Scan to E-mail
and
Scan to File
applications.
These four selections can be accessed from
ControlCenter2.0 or from the
Scan
key on the control panel
of the machine. The
Target Application
,
File Type
and scan
settings are configured independently by choosing the
Software Button
or
Device Button
tabs of the
ControlCenter2.0
Configuration
window.
Image (example: Apple PreView)
Scan to Image
feature allows you to scan an image directly
into your graphics application for image editing. To change
the default settings, click on the button while holding down the
Ctrl key and select
Software Button
or
Device Button
.