Filter
Top Products
How to scan using Windows
®
2 - 9
2
Pre-Scanning to crop a portion you want to scan
The
PreScan
button is used to preview an image for cropping any unwanted areas from the image. When
you are satisfied with the preview, click the
Start
button in the scanner window to scan the image.
1
Load your document.
2
Select the settings for
Image Type
,
Resolution
,
Scan Type
,
Brightness
,
Contrast
and
Document
Size
, as needed.
3
In the Scanner Setup dialog box, click the
PreScan
button.
The entire document will be scanned into the PC and will appear in the Scanning Area.
4
To select the portion you want to scan, click and hold the
left mouse button, then drag the mouse pointer over the
area.
Note
If you enlarge the image using button, you can then use the button to restore the image to its former
size.
5
Load your document again.
Note
If you have a flatbed type model, and you loaded your document onto the scanner glass in step 1, please skip
this step.
6
Click
Start
.
This time only the selected area of the document will appear in the PaperPort
®
9.0SE window (or your
software application window).
7
In the PaperPort
®
9.0SE window, use the options available to refine the image.
Scanning area
Scanning area