Filter
Top Products
4
4
4 - 1
MFC Remote Setup
The MFC Remote Setup application enables you to configure
many MFC settings from a Windows
®
application. When you
access this application, the settings on your machine will be
downloaded to your PC and displayed on your computer
screen. If you change the settings, you can upload them
directly to the machine.
Note
You cannot use the MFC Remote Setup application if your
machine is connected via a Network. (See Network User’s
Guide.)
From the
Start
menu, select
Programs
,
Brother
,
MFL-Pro Suite MFC-XXXX
(Where XXXX is your model
name), and then select
MFC Remote Setup
.
OK
button
When you click
OK
, the process of uploading the data to the machine begins. The MFC Remote Setup
program is closed if an error message is displayed, enter the correct data again and then click
OK
.
Cancel
button
The
Cancel
button clears your changes and exits the MFC Remote Setup application without uploading any
data to the machine.
Apply
button
The
Apply
button uploads the data to the machine, but stays in the Remote Setup application so you can
make more changes.
Print
button
The
Print
button prints the selected items on the machine. You cannot print the MFC Remote Setup changes
until you click the
Apply
button to upload the new data to the machine. Then you can click the
Print
button
to get an up-to-date printout.
Export
button
Click the
Export
button to save your current settings to a file.
Import
button
Click the
Import
button to read the settings from your saved file into the MFC Remote Setup screen.
Note
You can use the
Export
and
Import
buttons to save and use several sets of settings for your machine.
Using MFC Remote Setup (For Windows
®
)
(not available for DCP-7020)