Filter
Top Products
11
Uninstalling the software and
printer driver
Uninstall the P-touch Editor Ver. 3.1/P-touch Quick
Editor software from a PC as described below.
1 Start up Windows
®
98/98SE/Me/2000/XP.
2 Click the Start button in the taskbar, select
“Settings”, and then click “Control Panel”.
With Windows
®
XP, click the Start button in
the taskbar, and then click “Control Panel”.
3 In the Control Panel window, double-click
“Add/Remove Programs”.
* The dialog box that appears may differ
depending on the operating system being
used.
4 In the Add/Remove Programs Properties
dialogue box, select "P-touch Quick Editor"
(to delete the P-touch Quick Editor software)
or “P-touch Editor 3.1” (to delete the P-touch
Editor Ver. 3.1 software), and then click the
Add/Remove button.
5 A message appears, asking if you wish to
delete the selected application. Click the Yes
button to delete the application.
If you do not wish to delete the
application, click the No button.
6 In the dialogue box that appears, indicating
that the application is deleted, click the OK
button.
Replacing, deleting or adding
another printer driver
1 Turn off the PT-2420PC, and then disconnect
it from the computer.
2
Insert the enclosed CD-ROM into the
computer’s CD-ROM drive. A dialogue box
automatically appears, allowing you to select
the language.
If the dialog box does not automatically appear, click
“My Computer” on the desktop, and then double-click
the CD-ROM drive containing the CD-ROM.
(For Windows
®
XP, click “My Computer” in the Start
menu, and then double-click the CD-ROM drive
containing the CD-ROM.)
Next, double-click “Setup.exe” to display the dialog box.
3 Select the language for the Windows
®
operating system that you are using, and then
click the OK button. A dialogue box appears,
allowing you to select what to install.
4
Click the bottom button (Driver) on the right
side. The first Driver Setup dialogue box appears,
allowing you to select whether to replace, delete
or add another PT-2420PC printer driver.
5 Select the desired operation, and then click
the Next button.
If “Replace with new Brother PT-2420PC”
is selected, the previously installed printer
driver is deleted, and replaced with a new
one. Select this option when upgrading
the printer driver, or when running
Windows
®
2000/XP and changing to a
PT-2420PC with a different serial number.
If “Add Brother PT-2420PC” is selected, a
new printer driver is added. With USB on
Windows
®
98/Me, only a port is added
without adding the PT-2420PC as a new
printer. Select this option when connecting
and using multiple PT-2420PCs with the
same computer.
For Windows®