Filter
Top Products
8 - 17 MESSAGE MANAGER
95 Changing Fax
Forwarding/Paging
setting
If you hear one long beep, the change is accepted.
If you hear three short beeps, you cannot change it
because the conditions have not been met
(Example: registering paging number).
You can register your fax forwarding number by
using 4.FAX FWD NO. (See Changing the Fax
Forwarding Number
on page 8-20.) Once you have
registered the number, the machine will
automatically turn to “FAX FWD:ON” mode. Then
retrieve a Memory Status List by entering 9 6 1 to
make sure that the Fax Forwarding number you
registered is correct in the List.
1OFF
2 Fax Forwarding
3 Paging
4 FAX FWD NO.
96 Retrieve Fax Enter the number of a remote fax machine to
receive a report or stored fax messages. (See
Retrieving the Memory Status List on page 8-18
and Retrieving Fax Messages on page 8-19.)
1 Memory Status
List
2 Retrieve all FAX
3 Erase FAX in
the memory
If you hear one long beep, you can erase the fax
message from the memory.
97 Check the receiving
status
You can check whether your fax machine has
received any Document or Voice messages. If yes,
you will hear one long beep. If no, you will hear
three short beeps.
1 Document
2Voice
98 Change Answer Mode If you hear one long beep, you can change the
answer mode. If you hear three short beeps, you
cannot change it. (Example: There is no TAD MSG
when you want to change to TAD mode.)
1TAD
2 FAX/TEL
3FAX
90 Exit After a long beep, you can exit remote control.
Remote control commands Detail Operation