Filter
Top Products
5 - 3 SETUP RECEIVE
Setting the Ring Delay
The Ring Delay sets the number of times the fax machine rings
before it answers in
FAX ONLY
,
FAX/TEL
or
TAD
mode.
1
Press
Menu/Set
,
2
,
1
.
2
Press or to select
RING
DELAY
.
Press
Menu/Set
.
3
Press
Stop
.
Setting the F/T Ring Time (FAX/TEL mode only)
If you set the Receive Mode to FAX/TEL, you’ll need to decide how
long the fax machine will signal you with its special pseudo/double-ring
when you have a voice call. (If it’s a fax call, the fax machine prints the
fax.) This ringing happens after the initial ringing from the phone
company. Only the fax machine rings (for 20, 30, 40 or 70 seconds)
and no other phones on the same line will ring with the special
pseudo/double-ring. However, you can answer the call on any
extension phone (in a separate wall socket) on the same line as the
fax machine. (See
Operation from extension telephones
on page 5-8.)
1
Press
Menu/Set
,
2
,
2
.
2
Press or to select how long
the fax machine will ring to alert you
that you have a voice call.
Press
Menu/Set
.
3
Press
Stop
.
When Toll Saver is
ON
, it overrides your Ring Delay setting. Toll
Saver must be off for the machine to operate using your Ring
Delay setting. (See
Setting the Toll Saver
on page 8-10.)
Even if the caller hangs up during the pseudo/double-ringing,
the fax machine will continue to ring for the set time.
1.RING DELAY
2.F/T RING TIME