Filter
Top Products
5 - 9 SETUP RECEIVE
Remote Call Transfer
In order to set the Fax Receive, you should first set
Menu/Set
,
2
,
4
REMOTE CODE to ON. (See
Changing Remote Codes
on page
5-10.)
This function works when you receive the incoming Voice call at the
remote DECT cordless phone externally connected to the fax
machine. (See Connecting an external telephone on page 1-9.) You
can transfer voice call to the fax machine. But you cannot transfer the
incoming voice call from the fax machine to the DECT cordless
phone.
To transfer a telephone call to the fax machine
When you pick up the voice call at the remote DECT cordless phone
and would like to transfer it to the fax machine,
1
Press DECT Activation Code
8 1
at remote cordless phone.
2
The fax machine rings (pseudo-ring same as current F/T ring)
and the display shows “
PICK UP PHONE
”.
3
Pick up the handset.
—OR—
Just press
Speaker Phone
at the fax machine in order to
transfer the voice call to the fax machine.
If nobody answers at the fax machine, pseudo-ringing stops after 30
seconds. In that case, it may still be possible to speak with the caller
from the cordless phone. Speech between the fax machine and the
cordless phone (= intercom) is not possible.
Don’t hang up the call from the cordless phone until the voice
call has been transferred to the fax machine. You will know
when this is because you will no longer be able to hear or talk to
the caller via the cordless phone. If you do not wait until this
point before hanging up from the cordless phone, the call will be
lost.