Filter
Top Products
1 - 12 INTRODUCTION
Recording outgoing message (OGM) on an external TAD
Timing is important in recording this message. The message sets up
the ways to handle both manual and automatic fax reception.
1
Record 5 seconds of silence at the beginning of your message.
(This allows the fax machine time to listen for the fax CNG tones
of automatic transmissions before they stop.)
2
Limit your message to 20 seconds.
3
End your 20-second message by giving your Fax Receive Code
for people sending manual faxes. For example:
“After the beep, leave a message or send a fax by pressing
51 and Start.”
We recommend beginning your OGM with an initial 5-second
silence because the fax machine cannot hear fax tones over a
resonant or loud voice. You may try omitting this pause, but if the
fax machine has trouble receiving, then you must re-record the
OGM to include it.