Filter
Top Products
5 - 7 SETUP RECEIVE
Reception into memory
As soon as the paper tray becomes empty during fax reception, the
screen will display
CHECK PAPER
; please put some paper in the
paper tray. (See Quick Setup Guide.)
If the Memory Receive is set to ON
If sufficient memory is available, the current fax reception will
continue and remaining pages will be stored in memory. Subsequent
incoming faxes will also be stored into memory until the memory
becomes full, following which no further incoming fax calls will be
answered automatically. To print all the faxes stored in memory,
insert paper into the paper tray.
If the Memory Receive is set to OFF
If sufficient memory is available, the current fax reception will
continue and remaining pages will be stored in memory, subject to
available memory. Subsequent incoming faxes will not be answered
automatically until fresh paper is put in the paper tray.
1
Press
Menu/Set
,
2
,
6
.
2
Use or to select
ON
(or
OFF
).
Press
Menu/Set
.
3
Press
Stop
.
Receiving a fax at the end of a conversation
At the end of a conversation you can ask the other party to fax you
information before you both hang up.
1
Ask the other party to place the document in their machine and
to press the start key. Tell the other party to wait until the fax
machine sends receiving tones (chirps) before hanging up.
2
When you hear the other machine’s CNG tones (beeps), press
Start/Copy
.
The LCD shows:
3
Replace the handset.
6.MEM.RECEIVE
RECEIVE