Filter
Top Products
TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 12
2
Remove the print cartridge containing the used ribbon and set it
upside–down with the blue gear in the upper left corner.
3
Take the used ribbon out of the cartridge:
1
Unclip the upper white spool and slide the roll off the blue gear.
(Do not remove the blue gear)
2
Lift out the lower roll.
4
Slide the white elastic off the new refill rolls and set them down
with the full roll in the lower position. (The ribbon’s shiny side is
facing
down
.)
Blue Gear
Blue
Gear
Used Ribbon
Upper White Spool
Cartridge
Lower White Spool
White Gear