Filter
Top Products
MESSAGE MANAGER 8 - 20
Changing the Fax Forwarding Number
The default setting or a fax forward number that has been previously
stored can be changed from a remote fax machine.
1
Dial your fax machine’s number.
2
When you hear the beep, immediately enter your Remote
Access Code (3 digits followed by ).
3
When you hear two short beeps, use the dial pad to press
9 5 4
.
4
Enter the new number of the remote fax machine where you
want your fax messages forwarded, and then press
#
#
.
5
To retrieve the Memory Status List, when you hear two short
beeps, use the dial pad to press
9 6 1
.
6
Use the dial pad to enter the number of the remote fax machine
(up to 20 digits), and then press
#
#
.
7
After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine. Your fax
machine then sends the Memory Status List showing the new
forwarding number to the remote fax machine.
8
Check the forwarding number.
If the forwarding number is incorrect, return to Step 1 to reset it.
You cannot use and
#
as dial numbers. However, if you want
to store a pause, press
#
. Also, if your fax machine is connected
to a PABX, you can press
#
first before the fax machine’s
number. The
#
works as well as
R
key.