Filter
Top Products
104
CHAPTER TWELVE
Changing Fax Forwarding Number
You can change the default setting of your fax forwarding number from a
remote fax machine.
1
Dial your MFC number.
2
When you hear the beep, immediately enter your Remote Access Code
(
1
5
9
).
3
When you hear two short beeps, use the dial pad to press
9
5
4
.
4
Enter the new number of the remote fax machine where you want your
fax messages forwarded, and then press .
You cannot use and as dial numbers. However, if you want to
store a pause, press .
5
To retrieve the Memory Status List, when you hear two short beeps, use
the dial pad to press
9
6
1
.
6
Use the dial pad to enter the number (up to 20 digits) of the remote fax
machine, and then press .
7
After you hear your MFC beep, hang up and wait.
Your MFC calls the remote fax machine. The remote fax machine prints
the Memory Status List showing the new forwarding number.
8
Check the forwarding number.
If the new number is incorrect, return to Step 1 to reset it.