Filter
Top Products
130
CHAPTER FIFTEEN
If You Don’t Have a CD-ROM Drive
All software is supplied on CD-ROM. If you need a Floppy Diskette version
(only Multi-Function Link Pro and Visioneer PaperPort LE are available on
Floppy Disks, item numbers DSK7131 (for Windows
®
3.1 or 3.11) and
DSK7195 (for Windows
®
95 or 98). If you are using Windows NT
®
Workstation Version 4.0, the software is not available on Floppy Diskette.).
You must tell the Brother Representative the version of Windows
®
that you
are using and your MFC model number. To order, call Brother at 1-888-879-
3232 (USA), 1-800-668-2768 (from within Canada) or 1-514-685-6464
(from within Montreal).
Computer Requirements
The following are the minimum computer requirements you need to set up
and operate the MFC as a printer. Use only a shielded interface cable that is
IEEE-1284 compliant, and that is less than 6.5 feet (2 meters) long.
CPU Pentium 75 or Higher
RAM 8MB or greater for Windows
®
3.1 or 3.11
8MB or greater for Windows
®
95 or 98
(16MB recommended)
16MB or greater for Windows NT
®
Workstation
Version 4.0 (32MB recommended)
Hard Disk Drive 50MB CD-ROM 1
250MB CD-ROM 1 & 2
Operating System Windows
®
3.1, 3.11, 95, 98 or NT
®
Workstation Version 4.0,
DOS environment compatible with your Windows
®
version