Filter
Top Products
30
CHAPTER FOUR
Alternating Displays
When you see alternating displays, the LCD sometimes alternates between
the currently selected option, and a help message giving brief instructions
about how to proceed. The display you’ll probably see most often is shown
below, showing you, when you place a document in the feeder, that you can
dial a number and send a fax, or you can make a copy.
FAX: NO. & START
SCAN READY
COPY: PRESS COPY
SCAN READY
Function Selection Table
You can probably perform most of these programming settings without the
Owner’s Manuals. To help you understand the function selections, options
and settings that are found in the MFC programs, use the Function Selection
Table below.
1. Fax Functions
1. INITIAL SETUP
Function Description Factory Set More Info
1. TONE/PULSE Selects dialing mode. TONE p. 35
2. DATE/TIME Enter date and time for LCD 1999 1/1 00:00 p. 36
display and heading on
transmissions.
3. STATION ID Program name, fax number and — pp. 36–37
telephone number to appear on
each transmitted page.
4. BEEPER Adjust volume level of beeper. LOW p. 39
5. DELAYED TIMER Sets the time of day that 00:00 p. 40
delayed faxes will be sent.