Filter
Top Products
8
CHAPTER EIGHT
Setup Auto Dial
Numbers
71
Storing Numbers for Easy Dialing
You can set up your MFC to do three types of easy dialing: One Touch,
Speed Dial, and Groups for Broadcasting of faxes.
Storing One Touch Dial Numbers
You can store 24 fax/phone numbers that you can dial by pressing one key.
You also can store names with these numbers. When you press a One Touch
dial location, the screen displays the name or number as the call is dialed.
One Touch keys are not the dial pad keys. They are the 12 keys (numbers
01–24) located to the right of the dial pad.
Number 13-24 are accessed by holding down shift while you press the
appropriate One Touch key.
1
Press
Function
,
1
,
6
,
1
.
2
Press the One Touch key where you want to store a number. To store a
number in locations 13–24, press shift (
Shift
), then press a key.
(One-Touch key
01
is pre-programmed for Brother Fax-Back System,
USA only. You can override it if you wish.) The screen displays the
location you selected.
3
Enter a number (up to 20 digits). If you want to enter a pause in the
dialing sequence (to wait for an “outside line,” for example), press
Redial/Pause
as you’re entering digits. Pressing
Redial/Pause
enters a
3.5 second pause when the number is dialed, and a dash appears on the
screen.
4
Press
Set
. The screen prompts you to enter a name for this number.
NAME:
See
One Touch
Dialing
p. 78