A-6 SmartSwitch ATM User Guide
MIB, SMI, MIB Files and Internet MIB Hierarchy Agent Support
A.1.6 ATM SmartSwitch MIB Support
The ATM SmartSwitch is shipped with the following MIBs:
• MIB II (RFC 1213)
• Interface Table MIB (RFC 1573)
• AToM MIB (RFC 1695)
• AToM2 MIB
• LANE MIB (ATM Forum)
• ILMI 4.0 MIB (ATM Forum)
• PNNI MIB (ATM Forum)
• IP over ATM MIB
• ATM SmartSwitch MIBs (proprietary)
• Soft PVC MIB
Note Along with the MIBs, the CD-ROM also contains a README file and the release
note.
A.1.7 MIB Exceptions
With the current implementation of MIB files, conformance to ATM standards for the ATM SmartSwitch includes the
following exceptions.
Non-Conformance
• atmInterfaceIlmiVpi — Read-only
• atmInterfaceIlmiVci — Read-only
• aal5VccTable — Not supported
• atmSvcVcCrossConnectRowStatus Set — Not supported
• atmConfigSigType — The values given below are not supported:
- ituDss2
- atmfBici2Dot0
• znIpAtmClientDDVcType — Accepts only pvc(2) in sets
• lecMulticastSendType — Accepts only best effort (1)
• lecMulticastSendAvgRate — Accepts values only up to 370370
• lecMulticastSendPeakRate — Accepts values only up to 370370
• leArpEntryType — Accepts only staticVolatile (4) and staticNonVolatile (5)
• lesControlTimeout — Read-only
• atmTrafficDescrParamIndexNext — Not supported
• atmVplCastType — The values given below are not supported: