Filter
Top Products
Chapter 5: Local Management
5-62 6H122-16 User’s Guide
5.18 SWITCH CONFIGURATION SCREEN
The Switch Configuration screen, Figure 5-27, provides the basic setup
options to modify switch operations in your network.
To access the Switch Configuration screen from the Module
Configuration Menu screen, use the arrow keys to highlight the SWITCH
CONFIGURATION menu item and press ENTER. The Switch
Configuration screen, Figure 5-27, displays ports 1 through 8. To view or
edit the fields for ports 9 to 16, highlight the navigation field [9-16] at the
bottom of the screen and press the ENTER key. Once in the screen
viewing ports 9 to 16, the navigation fields [1-8] and [17-21] can be seen.
These fields can be used to go to the first screen and last screen,
respectively.
Figure 5-27 Switch Configuration Screen
NOTE
The Switch Configuration screen will not be available if the
operational mode of the module has been set to SECURE
FAST VLAN. This screen may only be used by modules
configured to operate as 802.1D or 802.1Q switches.
Firmware Revision: XX.XX.XX
Switch Configuration
BOOTPROM Revision: XX.XX.XX
Port #
1
2
3
4
5
6
7
8
State
learning
disabled
standby
disabled
listening
disabled
forwarding
forwarding
Module Type: 6H122-16
Slot Number:
X
6C105 LOCAL MANAGEMENT
Event Message Line
RETURNSAVE
MAC Address
00-00-1D-00-00-00
00-00-1D-00-00-01
00-00-1D-00-00-02
00-00-1D-00-00-03
00-00-1D-00-00-04
00-00-1D-00-00-05
00-00-1D-00-00-06
00-00-1D-00-00-07
Status
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
[ENABLED]
[ENABLED]
Switch Address: 00-00-1D-00-00-00
Number of Ports: 21
Type of STA: [IEEE]
EXIT
Age Time (sec): 300
[9-16]
2361_18