Filter
Top Products
Chapter 5: Local Management
5-46 6H122-16 User’s Guide
Figure 5-20 Configuration Warning Screen
5. Use the arrow keys to highlight the YES command and press ENTER.
The changes are saved and the module reboots.
5.15.3 Setting the Default Gateway
If the SNMP management station is located on a different IP subnet than
the 6H122-16, a default gateway must be specified. When an SNMP Trap
is generated, the 6H122-16 sends the Trap to the default gateway. To set
the default gateway, perform the following steps:
1. Use the arrow keys to highlight the Default Gateway field.
2. Enter the IP address of the default gateway using the DDN format.
For example: 134.141.79.121
3. Press ENTER. If the default gateway entered is a valid format, the
cursor returns to the beginning of the Default Gateway field. If the
entry is not valid, the Event Message Line displays “INVALID
DEFAULT GATEWAY OR FORMAT ENTERED”. Local
Management does not alter the current value, but it does refresh the
Default Gateway field with the previous value.
4. Use the arrow keys to highlight the SAVE command.
5. Press ENTER. The Event Message Line at the top of the screen
displays “SAVED OK”.
WARNING!
174252
YOU HAVE ELECTED TO SAVE ONE OR MORE CONFIGURATION
ITEMS THAT REQUIRE RESETTING THIS MODULE.
ARE YOU SURE YOU WANT TO CONTINUE?
YES
NO