Filter
Top Products
Network Tools
6H122-16 User’s Guide 5-107
link_trap:
Syntax: link_trap [enable/disable/status] <PORT/all>
Description: The link_trap command allows link traps to be
enabled or disabled when specifying a single
port, or simultaneously when specifying “all”
or no ports. When one or all ports are specified
to enable, disable, or find their status, their
current condition is displayed.
Options: Not Applicable
Example:
5.29.2 Special Commands
done, quit, exit:
Syntax: done
Description: The done command enables the user to exit
from Network Tools and return to the Main
Menu screen.
Options: Not Applicable
Example:
-> link_trap status
Port 1 is ENABLED
Port 3 is ENABLED
Port 2 is DISABLED
Port 4 is ENABLED
-> link_trap disable 2
-> link_trap disable all
-> link_trap status 3
LINK TRAP STATUS:
Link traps have been DISABLED on port 2
Link traps have been DISABLED on all ports (1-16)
Link traps are ENABLED on port 3
-> done