Filter
Top Products
Accessing Local Management
6H122-16 User’s Guide 5-9
5.4.1 Navigating Local Management Screens
The 6H122-16 Local Management application consists of a series of
menu screens. Navigate through Local Management by selecting items
from the menu screens.
The 6H122-16 supports three modes of switch operation. The switching
modes are as follows:
• 802.1D SWITCHING (IEEE 802.1D switching)
• 802.1Q SWITCHING (802.1Q port based VLANs)
• SECURE FAST VLAN (Cabletron Systems SecureFast Switching)
The switch operational mode may be set in either the Chassis
Configuration screen (Section 5.7), or the General Configuration screen
of the module (Section 5.15). Depending on the Operational Mode set for
the module, the hierarchy of Local Management screens differs as shown
in Figure 5-4, Figure 5-5, and Figure 5-6.
NOTE
The User’s password is one of the community names specified
in the SNMP Community Names screen. Access to certain
Local Management capabilities depends on the degree of
access given to the specific community name. Refer to
Section 5.8.
If an invalid password is entered, the terminal beeps and the
cursor returns to the beginning of the password entry field.
Entering a valid password causes the associated access level
to display at the bottom of the screen and the Main Menu
screen to display.
If no activity occurs for several minutes, the Password screen
displays and the session ends.
NOTE
Refer to the Release Notes shipped with the product to verify
which screens are supported in each of the three available
switching modes.