Filter
Top Products
Chapter 5: Local Management
5-32 6H122-16 User’s Guide
Remap Errors (Read-only)
Displays whether the corresponding source modules and ports are
configured to send errored frames to the destination modules and ports, or
to drop all errored frames before forwarding traffic.
Source Module [
n
] (Selectable)
Allows a selected module [n] to be configured as a source module.
Source Port [
n
] (Selectable)
Allows a selected port [n] to be configured as a source port.
Destination Module [
n
] (Selectable)
Allows a selected module [n] to be configured as a destination module.
Destination Port [
n
] (Selectable)
Allows a selected port [n] to be configured as a destination port.
Errors (Toggle)
Allows the user to configure the source modules and ports to either send
errored frames to selected destination modules and ports (ON option), or
to drop errored frames, and send only valid traffic to the destination
modules and ports (OFF option). The default setting of this field is ON.
Status (Toggle)
Allows the user to add or delete the source/destination modules and ports
selected in the Source/Destination Modules and ports fields.
NEXT/PREVIOUS (Navigation Field)
There can be more than one Port Redirect Function screen depending on
the number of port redirect entries. To get to the second or subsequent
screens, use the arrow keys to highlight the NEXT field and press
ENTER. The next screen of redirect entries displays. In the new screen,
the navigation field PREVIOUS will display to allow the user to go back
to the first or previous screens.
5.11.1 Changing Source and Destination Ports
Add or delete source/destination module and port entries as follows:
1. Use the arrow keys to highlight the Source Module field.
2. Press the SPACE bar or BACKSPACE one or more times to increment
or decrement the module number displayed in the brackets [n] until the
appropriate module number is displayed.