Cabletron Systems 6H122-16 Switch User Manual


 
Chapter 5: Local Management
5-12 6H122-16 User’s Guide
Using the Return Command
1. Use the arrow keys to highlight the RETURN command at the bottom
of the Local Management screen.
2. Press ENTER. The previous screen in the Local Management
hierarchy displays.
3. Exit from 6H122-16 Local Management by repeating steps 1 and 2
until the chassis Main Menu screen displays.
4. Use the arrow keys to highlight the RETURN command at the bottom
of the chassis Main Menu screen.
5. Press ENTER. The Password screen displays and the session ends.
NOTE
The user can also exit Local Management screens by pressing
ESC twice. This exit method does not warn about unsaved
changes and all unsaved changes will be lost.
NOTE
If a Local Management session running on the terminal is left
idle for 15 minutes, the session ends and the Local
Management password screen displays. This is a normal
security function, and the default lockout time can be changed
by the user. See Section 5.7.6 for details.