Filter
Top Products
Placing Originals
2-36
2
Basic Operations
Feeder
You should use the feeder when you want to copy several originals at the same
time. Place the originals into the feeder and press (Start). The machine
automatically feeds the originals to the platen glass and scans them. Two-sided
originals can also be automatically turned over and scanned as two-sided
documents.
• Weight:
- One-sided scanning: 11 to 32 lb bond (42 to 128 g/m
2
)
- Two-sided scanning: 13 to 32 lb bond (50 to 128 g/m
2
)
• Size: 11" x 17", LGL, LTR, LTRR, or STMT
IMPORTANT
•
Thin originals may become creased, if used in a high temperature or high humidity
environment.
•
Do not place the following types of originals into the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which may not feed smoothly
- Transparencies and other highly transparent originals
•
If the same original is fed through the feeder repeatedly, the original may fold or become
creased, and make feeding impossible. Limit repeated feeding to a maximum of 30 times
(this number varies, depending on the type and quality of the original).
•
If the feeder rollers are dirty from scanning originals written in pencil, perform the feeder
cleaning procedure. (See "Routine Cleaning," on p. 7-51.)
•
Always smooth out any folds in your originals before placing them into the feeder.
1
Adjust the slide guides to fit the size of your originals.
• Tray Capacity:
up to 50 sheets (20 lb bond (80 g/m
2
))
(up to 10 sheets if using 11 lb bond (42 g/m
2
) paper)