Filter
Top Products
xxix
CAUTION
• Do not place heavy objects on the machine, as they may tip over or fall resulting in
personal injury.
• Close the feeder/platen cover gently to avoid catching your hands, as this may result
in personal injury.
• Do not press down hard on the feeder/platen cover when using the platen glass to
make copies of thick books. Doing so may damage the platen glass and result in
personal injury.
• Do not touch the finisher while the machine is printing, as this may result in personal
injury.
• Turn OFF the control panel power switch for safety when the machine will not be used
for a long period of time, such as overnight. Also, turn OFF the main power switch,
and disconnect the power cord for safety when the machine will not be used for an
extended period of time, such as during consecutive holidays.
• Do not place your hands, hair, clothing, etc., near the exit and feed rollers. Even if the
machine is not in operation, your hands, hair, or clothing may get caught in the
rollers, which may result in personal injury or damage if the machine suddenly starts
printing.
• Do not place your hands in the part of the tray where stapling is performed (near the
rollers) when a finisher is attached, as this may result in personal injury.
• The laser beam can be harmful to human bodies. Since radiation emitted inside the
product is completely confined within protective housings and external covers, the
laser beam cannot escape from the machine during any phase of user operation.
Read the following remarks and instructions for safety.
• Never open covers other than those instructed in this manual.
Finisher-AE1/Saddle Finisher-AE2Finisher-S1