Filter
Top Products
Specifying Device Information Delivery Settings
6-43
6
System Manager Settings
NOTE
•
For instructions on entering characters, see "Entering Characters from the Touch
Panel Display," on p. 2-22.
•
If any of the following is true for the destination machine, a message <Could not
retrieve information for the device to register. Register as a destination?> is
displayed. If you press [Yes], <Deliverable Settings> on the Details screen will be
blank.
- The main power is turned OFF
- The destination machine is not connected to the network
- A default key is not set
- Every function in Receive Restriction for Each Function under <Receiving
Settings> in Device Information Delivery Settings is set to 'On'
● To automatically search for destinations:
❑
Press [Auto Search/Register].
❑ Press [Auto Search Start].
Press [-] or [+] to set the search depth (how many routers to search).
NOTE
•
Since searching uses SLP (Service Location Protocol), machines behind a router
will not be detected if the router is set to restrict passing with the SLP protocol.
•
If any of the following is true for the destination machine, you cannot search the
destination.
- The main power is turned OFF
- The destination machine is not connected to the network
- Every function in Receive Restriction for Each Function under <Receiving
Settings> in Device Information Delivery Settings is set to 'On'
❑ Select the destination ➞ press [OK].
To select all of the destinations, press [Select All]. However, if a destination is
selected, this key changes to [Clear Selection].