Filter
Top Products
Adjusting the Machine
4-60
4
Customizing Settings
Adjusting the Machine
This section describes how you can make fine adjustments to the settings of the
machine, such as making a fine adjustment to the printed image and the page
number or watermark position.
It is recommended that you perform an Automatic Gradation Adjustment and clean
the machine regularly.
Zoom Fine Adjustment
When you print a copy or a document from an inbox, a slight difference in size may
occur between the size of the original image, and the size of the copied/printed
image. In this case, you can perform a fine adjustment to compensate for this
difference.
1
Press (Additional Functions) ➞ [Adjustment/Cleaning] ➞
[Zoom Fine Adjustment].
2
Press [-] or [+] to adjust the percentage (%) ➞ press [OK].
If you are making an adjustment to either the X (horizontal) or Y (vertical)
direction, press [-] or [+] to enter a value for that direction only.
Saddle Stitch Staple Repositioning
You can reposition the stapler of the saddle stitcher unit after clearing a staple jam,
or after replacing the staple cartridge. Saddle stitch staple repositioning works by
feeding several sheets of paper into the saddle stitcher unit and stapling them
together.
IMPORTANT
•
Only use 12" x 18", 11" x 17", LGL, or LTRR paper for the saddle stitch staple
repositioning procedure.
•
Make sure to remove all output booklets from the optional Booklet Tray before performing
the saddle stitch staple repositioning procedure.