Filter
Top Products
Entering the Department ID and Password
2-26
2
Basic Operations
3
When your operations are complete, press (Log In/Out) on
the control panel.
If you are using a control card, remove the control card, and take it with you. (See
"Card Reader-C1," on p. 3-44.)
The screen for entering the Department ID and password appears.
NOTE
•
To perform operations again, you have to re-enter your Department ID and
password.
•
If you do not press (Log In/Out) after you are finished operating the machine,
any subsequent copies made are added to the total of the Department ID you
previously entered.
•
Even if you forget to press (Log In/Out) after you are finished operating the
machine, the screen for entering the Department ID and password automatically
appears after the set Auto Clear Time elapses. (See "Auto Clear Time," on p. 4-58.)
•
After pressing (Log In/Out), all settings are canceled, and the machine returns to
the Standard mode.