Filter
Top Products
Specifying Common Settings
4-40
4
Customizing Settings
● If you want to select the tray home position (when the optional
Finisher-AE1, Saddle Finisher-AE2, or Finisher-S1 and Additional
Finisher Tray-B1 are attached):
❑
Press the Tray Home Position drop-down list ➞ select the tray home position to
be used while jobs are being processed.
Tray Home Position
Setting the Printing Priority
You can set the machine's printing priority. A job that belongs to a function with a
higher set priority is printed after the job currently being processed is complete.
NOTE
Priority printing does not take place until the current job is complete. However, if the
current job is paused, the printing of a job that belongs to a function with a higher set
priority may start, depending on the settings.
1
Press (Additional Functions) ➞ [Common Settings] ➞
[Printing Priority].
2
Select the printing priority for the various functions ➞
press [OK].
If you select [1] for a function, that function is given the highest printing priority.
[Printer] appears only if the optional UFR II/PCL Printer Kit or PS Printer Kit is
activated.
[Receive/Fax] appears if the Universal Send Kit is activated, and the optional
Super G3 FAX Board or Super G3 Multi-Line FAX Board is installed. If only the
Universal Send Kit is activated, [Receive] appears. If only the optional Super G3
FAX Board or Super G3 Multi-Line FAX Board is installed, [Fax] appears.
<Other> is used for setting the priority for printing reports.
PDL prints from MEAP applications are included in <Printer>. However, local
print jobs from MEAP applications are included in <Mail Box>.
[Tray A]: Tray A moves closer to the output area.
[Tray B]: Tray B moves closer to the output area.
[Off]: The tray home position is not set. The output tray stops at the
position it is in when printing finishes.