Filter
Top Products
Legal Notices
xx
Legal Notices
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the rear
panel of this equipment is a label that contains, among
other information, a product identifier in the format of
US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
The REN (Ringer Equivalence Number) is used to
determine the number of devices that may be connected
to a telephone line. Excessive RENs on a telephone line
may result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of the
RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone
company. The REN for this product is part of the product
identifier that has the format US:
AAAEQ##TXXXX. The digits represented by ## are the REN
without a decimal point (e.g., 10 is a REN of 1.0).
An FCC compliant telephone line cable and modular
plug is provided with this equipment. This equipment is
designed to be connected to the telephone network or
premise wiring using a compatible modular jack that is
Part 68 compliant.
This equipment may not be used on coin service provided
by the telephone company. Connection to party lines is
subjected to state tariffs.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected
by the procedures described in this guide or the
e-Manual, disconnect the equipment from the telephone
line cable and disconnect the power cord.
The telephone line cable should not be reconnected
or the main power switch turned ON until the problem
is completely resolved. Users should contact Canon
Authorized Service Facilities for servicing of equipment,
Information regarding Authorized Service Facility
locations can be obtained by calling Canon Customer
Care Center (1-800-OK-CANON).
Rights of the Telephone Company
If this equipment (Color imageCLASS M9280Cdn/
MF9220Cdn) causes harm to the telephone network,
the telephone company may temporarily disconnect
service. The telephone company also retains the right to
make changes in facilities and services that may affect
the operation of this equipment. When such changes are
necessary, the telephone company is required to give
adequate prior notice to the user.
However, if advance notice is not possible, the telephone
company will notify the customer as soon as possible.
Also, the customer will be advised of his/her right to file a
complaint with the FCC if he/she believes it is necessary.
The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic
device, including FAX machines, to send any message unless
such message clearly contains in a margin at the top or bottom
of each transmitted page or on the rst page of the
transmission, the date and time it is sent and an identication of
the business or other entity, or other individual sending the
message and the telephone number of the sending machine or
such business, other entity, or individual. (The telephone
number provided may not be a 900 number or any other
number for which charges exceed local or long-distance
transmission charges.)
In order to program this information into your machine, you
should complete the procedure for registering your name, unit’s
telephone number, time, and date in the Starter Guide.