Filter
Top Products
2-2
Originals Requirements
Originals and Print Media
Originals Requirements
Available original type, size, weight and quantity are shown in the table below.
Platen Glass Feeder
Type Sheet*
1
, book, three-dimensional objects Sheet
Size (W × L) Max. 8 1/2" × 14"
(Max. 215.9 mm × 355.6 mm)
Max. 14" × 8.5" (355.6 mm × 215.9 mm)*
2
Min. 5" × 5.5" (128 mm × 139.7 mm)*
2
Weight Max. 4.4 lb (2 kg) One-sided scanning (1 page): 13 to 34 lb (50 to
128 g/m
2
)*
3
One-sided scanning (more than 2 pages): 13 to 28 lb
(50 to 105 g/m
2
)*
4
Two-sided scanning: 17 to 28 lb (64 to 105 g/m
2
)
Quantity 1 sheet Max. 50 sheets*
5
(Max. 30 sheets for LGL originals)
*
1
When copying transparent originals such as tracing paper or transparencies, use a piece of plain white paper to cover the
original after placing it face-down on the platen glass.
*
2
When copying two-sided originals, only LTR, LGL, FLSC, A4 can be used.
*
3
17 to 34 lb (64 to 128 g/m
2
) when copying originals smaller than LTR/A4.
*
4
17 to 28 lb (64 to 105 g/m
2
) when copying originals smaller than LTR/A4.
*
5
20 lb (75 g/m
2
) paper
Do not place the originals on the platen glass or in the feeder until the glue, ink or correction fluid on the
originals are completely dry.
Remove all fasteners (staples, paper clips, etc.) before loading the originals in the feeder.
To prevent originals from jamming in the feeder, do not use any of the following:
Wrinkled or creased paper
Carbon paper or carbon-backed paper
Curled or rolled paper
Coated paper
Torn paper
Onion skin or thin paper
Paper printed with a thermal transfer printer
Transparencies
–
–
–
–
–
–
–
–