Filter
Top Products
Print Server Installation
12 AXIS 1650 User’s Manual
1. Install AXIS IP JumpStarter, it is available on the AXIS 1650 CD and on
www.axis.com
2. Select a print server from the Serial Number list. All AXIS 1650 appear with
the default IP address 192.168.0.90. If you are installing several AXIS 1650,
check the Serial Number to locate a specific print server.
3. From the Server menu, select Set IP Address. The Set IP Address dialog
appears.
4. Click the radio button that corresponds to your choice of IP setting method
(static or dynamic using DHCP). When assigning a static IP address you also
have to define the Subnet Mask and Default Gateway.
5. Click OK to save your settings.
6. You may be prompted to enter the server root password (by default set to
<blank>), click OK and the print server will appear in the list with the
assigned IP address.
7. To verify that you have access to the print server’s Web pages, highlight the
print server in the list and select Server Home Page from the Server menu.
8. You have now finished the procedure of setting the IP address. Continue to
Windows Installation, on page 17.
All AXIS 1650 have the default IP address 192.168.0.90
Change this default IP address to either a
static IP address or to a DHCP address.