Filter
Top Products
Scanning with AXIS 1650
58 AXIS 1650 User’s Manual
4. Right-click the device you would like to use (example: WIA Canon MF3110)
and select Get picture using Scanner Wizard.
5. The Scanner and Camera Wizard starts. Click [Next].
6. Select scanning parameters and start scanning.
7. When scanning is ready, disconnect from the scanner - see page 56 and
remove the scanned object from the flatbed.
Example 2 Example using Gimp:
1. Connect to the scanner with AXIS ScanClient - see page 56 and place the
object to be scanned on the scanner flatbed.
2. Start Gimp.