Filter
Top Products
Scanning with AXIS 1650
AXIS 1650 User’s Manual 59
3. Select File | Acquire | TWAIN...
4. Select source (e.g. MF3110).
5. Select scanning parameters and start scanning.
6. When scanning is ready, disconnect from the scanner - see page 56 and
remove the scanned object from the flatbed.
Invoking a Scan from the Canon Device
First time only:
Prepare your
Computer
These five steps are just needed prior to the first scanning invoked from
the Canon device to a certain client computer. By setting these
parameters, the scanning software will be able to work automatically.
1. Connect to the scanner with AXIS ScanClient - see page 56.
2. Go to Start | Printers and Faxes.
3. Click on Scanners and Cameras.
4. Right-click the device you would like to use (example: WIA Canon MF3110)
and select Properties.