Canon AXIS 1650 Network Card User Manual


 
Adding Printers in NetWare
28 AXIS 1650 User’s Manual
Section 7 Adding Printers in NetWare
This section describes how to continue the installation of the AXIS 1650
in a NetWare environment.
iPrint Using iPrint in the NetWare environment, users simply point to a Web
page that displays all printers available for installation. By clicking a
printer, the iPrint client is installed (if not installed previously), the
printer's driver is downloaded, and a printer is created on the user's
workstation; thus, the user will be able to send documents to the printer
from any application on the desktop.
Depending on your NetWare version, go on to “Setup using NetWare 6.5”
on page 28 or “Setup using NetWare 6.0” on page 34.
If you intend to operate your AXIS 1650 in a multi-protocol, mixed
environment, you should also proceed to the other relevant sections in
this manual.
Setup using NetWare 6.5
Start the iManager. Type https://<mapped name to file server sys
volume>/nps/iManager.html in the Address/Location field of your
browser and press Enter.
Example: https://nakoma.tl.com/nps/iManager.html.
In the Roles and Tasks frame of the iManager, expand iPrint to make all
commands available.
Check Print Manager
and Broker
Make sure that NDPS is installed and that the Print Manager and the
Broker both are loaded on your NetWare file server.
You can check the status of NDPS by selecting Roles and Tasks | iPrint |
Manage Print Manager, browse to the file server and select it. Ensure that
the status is NDPS Manager active.