Filter
Top Products
Chapter 8 Customizing the Printer 119
Customizing the
Printer
Chapter 8
Customizing the Printer
This chapter describes the factory default settings of the printer and the
steps you follow to customize these settings for your particular printing
needs.
You will find that the factory default settings provide features to meet most
of your printing needs. With these settings, your printer emulates any
Canon Bubble Jet printer and the IBM Proprinter X24E printer. This means
you can use the printer with any software application that supports these
printers.
Make sure the printer’s settings match the requirements of your software
application. If you have a unique printing requirement, you can customize
the printer by changing the FUNCTION settings as described in this
chapter.
Changing the FUNCTION Settings
Follow these steps to change the FUNCTION settings:
1. Press the MENU button once.
❏ The printer beeps once when it enters Menu mode.
2. Press the MENU button four more times. The display will look similar
to this:
3. Press the button as many times as necessary to bring the number
corresponding to the FUNCTION you wish to change into the display.
❏ If you hold the button down, the function numbers advance
automatically. Numbers range from 1 to 19 and then 1A in each
printer control mode, BJ mode and Epson LQ mode.