70 Using the Operator Panel Chapter 5
Selecting the Reduction Mode
We recommend that you use Reduction mode with MS-DOS applications
only (not Windows applications). Windows applications have a fit-to-page
feature that is not compatible with Reduction mode.
To select the reduction mode, follow these steps:
1. Press the MENU button once.
❏ The printer beeps once when it enters Menu mode.
2. Press the MENU button again.
❏ The display shows the possible Reduction modes:
3. Press the button to select the desired Reduction mode.
4. When the desired Reduction mode is blinking, press the ON LINE
button.
❏ The ON LINE light comes on.
❏ Printing in the selected Reduction mode is enabled.