Chapter 9 Installing and Using the Battery Pack 137
Using the Printer With the Battery Pack
To print using the battery pack, follow these steps:
1. Disconnect the AC adapter from the battery case.
❏ If the AC adapter is connected, the printer will not print.
2. Attach the parallel connector to connect the printer to the host
computer.
❏ Open the interface cover and connect the parallel cable.
❏ Align the cable connector with the printer’s interface port so the
shapes match.
❏ Lift the back of the battery case and printer if necessary.
❏ Gently press the cable connector into the port.
❏ Secure the cable connector by snapping the two wire clips (located
on the printer) into the cable connector.
Installing/Using
the Battery Pack