Filter
Top Products
Maintenance
20
6-20
Important
How to Replace the Printhead
Before replacing the printhead, you must first replace the two filters
provided with the printhead package. To replace the printhead, you must
select “Replace P.head” from the “System Setup” menu and then follow the
instructions on the printer operation panel.
• Remove printed and other media from the tray.
• Clean the carriage rail and the paper restraint. (Æ P.6-14, P.6-16)
• Replace the filters (Æ Instructions provided with the filters)
• Execute “Replace P.head” on the printer operation panel.
• After ink has drained from the printhead, remove it.
• Install the new printhead.
z You must follow exactly the procedure below when you replace the printhead. If
you fail to follow procedure, the printhead may leak and stain the work area.
z When you replace the printhead, you must also replace the filter. If the filter is not
replaced, this could interfere with the performance of the printer.
1
Press the Power button to switch the printer on.
After a few seconds “Online” is displayed in the operation panel and the
Online lamp lights.
2
Press the Online button twice to display “MAIN MENU”.
EnterCancel
Cut Sheet
Roll Media
Paper Source
Data Message
Power
Online