Filter
Top Products
Before Using the Printer
10
1-10
Important
Switching the Printer Off
When you are finished using the printer, follow this procedure to switch the
printer off.
z To prevent damaging the printer or losing valuable data, never switch it off or
disconnect the power cord while the printer is operating.
z If the roll media is not to be used for a week or so, open the roll media tray and take
up the roll media. Leaving the roll media at the standby position for a week or
longer could cause the media to deteriorate.
1
Check the display to make sure that a print job is not in progress.
If you see an error message displayed, follow the procedure to correct the
problem, and make sure the print job has completed. If a print job is in
progress, wait for the print job to complete before switching off the printer.
2
Press and hold down the Power button for over 1 second until the
Online lamp goes off, and then release the button.
“Please wait ..” is displayed for a few seconds, then the printer goes off.