Filter
Top Products
CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
39
3. Software
The controller (GC-201) bundles the dedicated control software.
Using the control software makes the following controller operations easy:
z Parameter setting
z Operation setting (Step movement and raster scan)
z Status check
z Servo tuning (Frequency characteristic measurement)
Most of the functions that can be performed by the control software can also be executed by external
commands input through RS-232C connection without using the control software. This manual
describes operations both by the control software and by RS-232C command input.
Note: The following function can be executed by the control software only, and not by RS-232C
command input:
z Frequency characteristic (FFT) measurement
z Auto tuning
z XY matching
z Step response measurement function
3.1. Supported PC Environment
Supported OS MS-Windows 2000, XP, Vista
Connection port RS-232C port (with USB-RS-232C conversion cable)
3.2. Installation CD
Installation folder structure of the bundled control software
Control Software (Control software installer)
Manual (GC-201, GC-251 manual)
The necessary software is not included in 11.1. “Firmware Update”. Please contact your sales
representative.