Filter
Top Products
2-5
Cisco AC/DC Power System User Guide, R1.0
May 2006
Chapter 2 System Installation
2.2.1 Install the System Shelf
Figure 2-3 ETSI Shelf Ear Mounts (system shelf and 1RU Distribution Shelf)
Step 2
Move the system shelf to the desired rack/cabinet slot (allowing 1RU above the shelf if a 1 RU
Distribution shelf will be installed).
Step 3 Secure the system shelf to the rack using the six included mounting screws (Figure 2-4).
Figure 2-4 Installing the System Shelf
Step 4
Continue with the “2.2.2 Install the 1 RU Distribution Shelf” procedure on page 2-6 if applicable. If this
system has no external distribution, place the 4 power connectors and alarm cables on the top of the
system shelf to aid in future 1 RU Distribution Shelf installation (Figure 2-5) and continue with
the“2.2.3 Install the Ground Cable” section on page 2-9.
124770
124779