Filter
Top Products
2-18
Cisco AC/DC Power System User Guide, R1.0
May 2006
Chapter 2 System Installation
2.4 Install Circuit Breakers
Figure 2-15 Removing a Rectifier Blank Faceplate
Step 8
Install additional rectifiers using the instructions in Steps 2 through 5.
For more information on installing rectifiers in a powered system, see the “4.2.2.2 Add Modules”
section on page 4-2.
2.4 Install Circuit Breakers
Note This procedure is optional for large systems.
Large systems equipped with the 1 RU Distribution Shelf require the installation of circuit breakers to
ensure proper system protection (the 1 RU Distribution Shelf is shipped with circuit breakers installed
for use in medium systems). To install circuit breakers in a large system:
Step 1 Make certain all breakers to be installed are in the OFF position (Figure 2-16).
124789