Filter
Top Products
3-10
Cisco AC/DC Power System User Guide, R1.0
May 2006
Chapter 3 Component Replacement
3.2.5 Replace GMT Fuses
3.2.5 Replace GMT Fuses
Step 1 Locate the GMT fuse that is to be removed.
Step 2 Grasp the fuse firmly at the front and pull out (Figure 3-10).
Figure 3-10 Removing a GMT Fuse
Step 3 For information on installing GMT fuses, see the “2.5.1 Install GMT Fuse Connections” procedure on
page 2-25.
Caution When replacing GMT fuses, always use the same size fuse unless the GMT fuse output cabling is
upgraded as well. For more information on the appropriate cable/fuse sizes, see Table 1-2 on page 1-6.
124772