Filter
Top Products
3-9
Cisco AC/DC Power System User Guide, R1.0
May 2006
Chapter 3 Component Replacement
3.2.4 Replace a Rectifier
Figure 3-9 Removing a Rectifier
Step 4
Grasp the handle and gently pull the module out and away from the shelf.
Caution The rectifier module may be hot when being pulled from the shelf. To avoid personal injury, wait until
the rectifier has cooled before removing from the system shelf.
Step 5 Continue to pull the rectifier until it is halfway out of the shelf. Grasp the bottom of the rectifier with
one hand and continue using the other hand to pull the rectifier out.
Step 6 Pull the rectifier out of the shelf. The system will generate a communication error, which will last until
a new rectifier is inserted.
Step 7 For information on installing a rectifier module, see the “2.3.1 Install the Rectifiers” procedure on
page 2-16.
1
2
124787